Technology

The people are the main value of DXIngeniería, but we also have the best state-of-the-art equipment that allow us to adapt to the requirements of each project and offer an adequate response to each situation. Below you can see some of the equipment we have and with which we carry out our work. Drones, cameras, processing equipment and advanced software are necessary for each of our jobs.

Drones

To be able to tackle different tasks we need the versatility provided by a varied fleet of equipment. In the case of drones, we have fixed-wing equipment to cover long distances or large areas in a single flight. Likewise, payloads (cameras, lidar, etc.) require more or less heavy equipment with adequate power.

The following is a list of the equipment we have at our disposal.

DJI Matrice 300 RTK

The crown jewel of DJI and DXEngineering. A versatile equipment with the latest technology in drones. Its great power and battery life allows us to tackle major jobs with different payloads and, especially, the DJI Zenmuse L1 lidar.

Its RTK capability guarantees centimeter positioning and unparalleled accuracy in topographic and photogrammetric work.

DJI Matrice 200

Matrice 200 is the evolution of professional quadcopters. The latest model of DJI provides better performance; more speed, more load capacity and greater reliability with lower consumption and noise of its propellers.

Parachutes are available for operations over population or people.

DJI Matrice 100

The Matrice 100 is a highly versatile quadcopter. It was developed with the ability to be customized, both in hardware and software. Thus, we can program it to perform various tasks and add different elements such as sensors and cameras according to the needs of each project. Our model has a double battery compartment for a longer flight duration.

DJI Phantom 4 Pro

A versatile drone with a high resolution stabilized camera. It is an all-terrain drone that we use in visual inspection of infrastructures, topography and photogrammetry studies and for photography and video in general.

A versatile drone with a high resolution stabilized camera.

At DXIngeniería we have two units of this model.

DJI Mavic Pro

The smallest of our drone family. For jobs where mobility is essential. Its reduced weight and size allow us to move easily with it and reach places that would not be possible with other equipment.

Its small size does not prevent us from performing high quality work thanks to its high resolution camera, capable of recording video in 4K.

LiDAR sensors

Zenmuse L1

This LiDAR combines the accuracy of laser measurements with a high-resolution RGB camera to create colored point clouds with high fidelity to the real world. Its capabilities enable ground measurements through the topsoil, making it an essential tool for large forestry and surveying jobs.

Cameras

Zenmuse X4S

Capable of recording 4K video at 60 Hz and 20 Megapixel photos thanks to its mechanical shutter, providing high contrast and high resolution images. The ideal camera for video and photogrammetry thanks to its three-axis stabilization system.

DJI XT Thermal camera

The XT thermal camera allows us to perform special jobs impossible to perform with other cameras. Rescue tasks, night vision, through smoke, inspection of power lines, solar panels, etc… A high technology camera of which we have the most advanced model; radiometric of high resolution and refresh rate.

DJI XT2 Thermal camera

The XT2 thermal camera increases the possibilities provided by the XT camera. To the radiometric thermal sensor signed by FLIR, it adds a second visual sensor (RGB). Thus, it allows to obtain simultaneous visual and thermal information, increasing the performance of our work and reducing costs.

Parrot Sequoia

This multispectral camera allows us to see things that our eye is not able to perceive. Particularly suitable for studying the health of crops, we use it in precision agriculture work together with the Zenmuse X3 BGNIR camera. But we do not stop there and, thanks to this camera, we are able to make certain inseptions related to hydraulic distribution.

DJI Zenmuse X3 BGNIR

The DJI Zenmuse X3 camera has had the infrared filter removed, making it a very useful camera for precision agriculture and water infrastructure inspection. We use it in conjunction with our Matrice 100 drone.

We are distributors too

We distribute the full range of DJI professional products. We have the product that fits your needs; drones, visible spectrum cameras, infrared and thermal; gimbals , spare parts and everything you may need to perform work with drone technology.

We have the product that suits your needs.

We advise you on the purchase of your equipment and its maintenance. With our demonstration program see what each device is capable of with an on-site visit. Ask us.

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies